PRODUCT >> Coal Based Activated Carbon >> Activated Carbon for Special Use

Activated Carbon For Desulfurization And Denitrification

Activated Carbon For Desulfurization And Denitrification

PRODUCT INTRODUCTION



Activated Carbon For Desulfurization and denitrification is a kind of coal - based granular activated carbon. Activated Carbon For Desulfurization And Denitrification is a special product used to treat the waste gas of sintering in steel mills, thermal power plants and large boilers. Activated Carbon For Desulfurization And Denitrification can not only purify and treat SO2 and NOX at the same time, but also remove mercury, arsenic and dioxins and reduce dust pollution. In addition, Activated Carbon For Desulfurization And Denitrification can effectively deal with the harmful substances in the flue gas produced by coal combustion, and the toxic metal in the flue gas also has a high removal effect.

The production process of Activated Carbon For Desulfurization And Denitrification is relatively simple, raw material source is relatively broad, investment scale is relatively small, the site requirements are not much. Activated Carbon For Desulfurization And Denitrification is widely used in thermal power plants, iron and steel plants, non-ferrous metal smelting, fuel, gas, coal, furnace ammonia, waste combustion and other industries of flue gas desulfurization and denitrification.


PRODUCT ADVANTAGES



right-1 Large surface area,rich mallpores right-1 Strong resistance against friction
right-1 Fastabsorption speed right-1 Pressure and high temperature
right-1 Easy cleaning right-1 Long service life

TECHNICAL PARAMETERS



Particle Size

(mm)

Iodine

(mg/g)

Bulk Density

(g/L)

Desulfurization

(g/L)

Denitrification

(%)

Abrasive Resisitance

(%)

Compressive Strength

(kgf)

10.0 ≥350 580+/-50 ≥20 ≥40 ≥97 ≥35
5.0 ≥350 580+/-50 ≥20 ≥40 ≥97 ≥35
3-5 ≥350 580+/-50 ≥20 ≥40 ≥97 ≥35


Particle Size

(mm)

Saturated Sulfur Capacity

(mg/g)

Moisture

(%)

Hardness

(%)

Bulk Density

(g/L)

4.0 ≥800 ≤5 ≥90 500+/-50
3.0 ≥800 ≤5 ≥90 500+/-50
1.5 ≥800 ≤5 ≥90 500+/-50


CHARACTERISTICS



right-1 Large pore volume right-1 High adsorption capacity
right-1 High efficiency right-1 High sulfur content
right-1 Adaptability right-1 Low working temperature
right-1 Renewable and reusable

  • +86-351-8065895 / 6866895
  • admin@newlinkcarbon.com
  • ADD: ROOM1207,BUILDING B,NO.198 TIYUXI ROAD,TAIYUAN,SHANXI,CHINA